South Bend Universal Horizontal/Vertical Milling Machine, Model FU 15, 23" X 64" Table, Pendant Control,
Table Width: 23" | Table Length: 64" | Horizontal Spindle Drive: 10 HP | Universal Head Spindle Drive: 10 HP
MTE BF5200 CNC Milling Machine 79" x 197" Table, Z=47", Universal Head,
X-Travel: 197" | Y-Travel: 79" | Z-Travel: 47" | Spindle Taper: 50 | Spindle Motor: 50 hp | Spindle Speeds:...
Bridgeport CNC Milling Machine, Series II, Table 11" X 54", X=33.5", 3500 RPM, TRAK Control
Table Size: 11" X 54" | Table Load Capacity: 750 lbs | Table Travel: 33.5" | Spindle Drive: 2 HP | Spindle ...
Bridgeport Series II Interact Mill, 16" X 47", X=30", Y=14.5", 5" Quill Travel, 50-3750 RPM, 2 HP Head, Heidenhain,
Table Length: 47" | Table Width: 16" | X-Travel: 29.5" | Y Travel: 16" | Quill Travel: 5" | Spindle Horsepo...
Okuma Howa Milling Machine, STM-2V, 12" X 53" Table, No 45 Taper, DRO
Table length: 53" | Table width: 12.5" | Table Travel: 28" | Y Travel: 12" | Z Travel: 16" (Knee Travel)
Cincinnati Bickford Super Service Radial Drill, 15" Column, 60" Arm, 1500 rpm, #5 MT Spindle Taper, 1500 rpm, 10 hp
Arm length: 60" | Spindle drive: 10 hp | Spindle taper: #5 MT | Column diameter: 15" | Spindle speed (maxim...
Warner & Swasey Turret Lathe, 5A, 36" x 96", 12" Hole, ID17431
Swing: 36" | Spindle bore: 12.5" | Spindle drive motor: 75hp | Distance between centers: 96"
Warner & Swasey Turret Lathe, 4A, 28" x 96", 9.25" Hole,
Swing: 28" | Spindle Bore: 9.25" | Chuck Diameter: 28" 4 Jaw | Distance Between Centers: 96" | Swing over c...
Webster Bennett Turret Lathe, DH, 72" Table, 79" Swing, 31" Height U/R, 150 RPM. Pendant Control
\ Table diameter: 72" | Maximum swing: 79" | Height Under the Rail: 31" | Table Drive: 20 HP | Table Speeds:...
American Engine Lathe, Power One, 35" x 80", 14" Spindle Bore, Inch Metric Threading, Steady Rest,
Maxmium Swing: 35" | Distance between centers: 80" | Spindle Drive: 40 HP | Chuck Size: 24" 3 Jaw | Spindle...
Kingston Engine Lathe, Heavy Duty 34, 34" x 120" 26" SOCS, Taper, Inch/Metric Threading, (2) Roller Rests
Swing Over Bed Ways: 34" | Swing Over Cross Slide: 26" | Distance Between Centers: 120" | Spindle Drive: 20 HP
Hercules Engine Lathe, Model SPA 10, 40" x 48", 800 RPM, Threading
Swing Over Bed Ways: 39.5" | Distance between centers: 48" | Spindle drive: 30 HP** | Spindle bore: 4.1"